one negative terminal on
IE-MiniMc.
See below for a diagram showing how
to cascade DC power.
NOTE: If you are using standard wire, you must “tin” the leads; use solid
wire as is.
NOTE: The chassis is protected against mis-wiring; if mis-wired the chassis
will merely not function.
C
A S C A D I N G
D C P
O W E R
When installing multiple
IE-MiniMc
units on a DIN-rail, you can use one DC
input source then cascade from one DC block to the next, until reaching
the maximum current available.
IE-MiniMc Operation
IE-MiniMc
is a 10/100 auto-negotiating, miniature media converter. The
fiber port always operates at 100 Mbps FDX; the copper port auto-senses
the connected device’s speed and duplex mode: 10 Mbps or 100 Mbps
and HDX or FDX (including Flow Control).
IE-MiniMc
offers plug-and-play operation, including the AutoCross feature
which automatically selects between a crossover work-station or pass-through
connection depending on the connected device.
IE-MiniMc
also protects
against Broadcast storms, and allows jumbo packets of up to 1916 bytes.
3
F
E D E R A L
C
O M M U N I C A T I O N S
C
O M M I S S I O N
R
A D I O
F
R E Q U E N C Y
I
N T E R F E R E N C E
S
T A T E M E N T
This equipment has been tested and found to comply with the limits for a Class B comput-
ing device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide rea-
sonable protection against harmful interference when the equipment is operated in a com-
mercial environment. This equipment generates, uses and can radiate radio frequency ener-
gy and, if not installed and used in accordance with the instruction manual, may cause harm-
ful interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which the user will be required to correct the interfer-
ence at his own expense.
This digital apparatus does not exceed the Class B limits for radio noise emission from dig-
ital apparatus set out in the Radio Interference Regulation of the Canadian Department of
Communications.
Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites
applicables aux appareils numériques de classe B prescrites dans le Règlement sur le brouil-
lage radioélectrique publié par le ministère des Communications du Canada
.
S
A F E T Y
C
E R T I F I C A T I O N S
UL/CUL:
Listed to Safety of Information Technology Equipment, Including Electrical
Business Equipment.
CE:
The products described herein comply with the Council Directive on
Electromagnetic Compatibility (89/336/EEC) and the Council Directive on
Electrical Equipment Designed for use within Certain Voltage Limits (73/23/EEC).
Certified to Safety of Information Technology Equipment, Including Electrical
Business Equipment. For further details, contact IMC Networks.
W
A R R A N T Y
IMC Networks warrants to the original end-user purchaser that this product, EXCLUSIVE OF
SOFTWARE, shall be free from defects in materials and workmanship under normal and prop-
er use in accordance with IMC Networks' instructions and directions for a period of six (6) years
after the original date of purchase. This warranty is subject to the limitations set forth below.
At its option, IMC Networks will repair or replace at no charge the product which proves
to be defective within such warranty period. This limited warranty shall not apply if the IMC
Networks product has been damaged by unreasonable use, accident, negligence, service or
modification by anyone other than an authorized IMC Networks Service Technician or by any
other causes unrelated to defective materials or workmanship. Any replaced or repaired prod-
ucts or parts carry a ninety (90) day warranty or the remainder of the initial warranty period,
whichever is longer.
To receive in-warranty service, the defective product must be received at IMC Networks no
later than the end of the warranty period. The product must be accompanied by proof of pur-
chase, satisfactory to IMC Networks, denoting product serial number and purchase date, a writ-
ten description of the defect and a Return Merchandise Authorization (RMA) number issued by
IMC Networks. No products will be accepted by IMC Networks which do not have an RMA
number. For an RMA number, contact IMC Networks at PHONE: (800) 624-1070 (in the U.S
and Canada) or (949) 465-3000 or FAX: (949) 465-3020. The end-user shall return the defec-
tive product to IMC Networks, freight, customs and handling charges prepaid. End-user agrees
to accept all liability for loss of or damages to the returned product during shipment. IMC
Networks shall repair or replace the returned product, at its option, and return the repaired or
new product to the end-user, freight prepaid, via method to be determined by IMC Networks.
Class 1 Laser product, Luokan 1 Laserlaite,
Laser Klasse 1, Appareil A’Laser de Classe 1
6
