This function is to be used in particular for special fonts with characters which do not exist
on the keyboard (e.g. logos).
8.2.3 Bolderization
This function is used to print bold characters in the message, without altering their height.
A dialog box asks you to enter the required stretch factor, from 1 to 9, with 9 being the
boldest (this factor is at 1 by default).
Next, all the selected symbols are written in the screen with the programmed stretched
factor (what you see on the screen is what will be printed).
There is no restriction to the number of stretches that can be performed per line or per
message.
8.2.4 Tabulation
This function is used to define a blank zone between two characters or symbols of a width
different from the standard space of the font used.
A dialog box asks you to enter the number of trames in this blank zone (1 to 255).
To place a tab:
- move the cursor to the desired position,
- enter "Tabulation" mode ( key),
- insert a tabulated [ SPACE ] key ),
- exit "Tabulation" mode ( key).
At any time during message editing, it is possible to add or remove frames from a tab.
To adjust a tab:
- position the cursor on the tab,
- enter "Tabulation" mode ( key),
- adjust ( or keys),
- exit "Tabulation" mode ( key).
Font
Bolderization
Utilization
A13540 Version E
Page 4-23
Summary of Contents for Jaime 1000 S4 Plus
Page 35: ...A13540 Version E Page 4 1...
Page 115: ......
Page 121: ...TECHNICAL SPECIFICATIONS 9 pages A13540 Version E Page 8 1...
Page 131: ...A13540 Version E Page 9 1...