Signal direction
Connection
After instalation follow the steps below to connect your machine.
(Imagistics may perform these for you as part of the installation.)
1.
Connect one end of the RS-232C cable to the RS-232C port on
your fax machine.
2.
Connect the other end of the RS-232C cable to your computer’s
RS-232C port.
Note: If you don’t know where your computer’s RS-232C port is,
check the computer’s operating instructions.
To connect between your fax machine and your computer, you will
need an RS-232C interface cable (supplied).
25-pin type
Your fax Your computer
2 TXD
2 TXD
3 RXD
3 RXD
4 RTS
4 RTS
5 CTS
5 CTS
6 DSR
6 DSR
7 SG
7 SG
20 DTR
20 DTR
9-pin type
Your fax Your computer
2 TXD
2 RXD
3 RXD
3 TXD
4 RTS
4 DTR
5 CTS
5 SG
6 DSR
6 DSR
7 SG
7 RTS
20 DTR
8 CTS
2
Summary of Contents for Imagistics RS-232C
Page 1: ......
