Platinum™ IP3
Installation and Operation Manual
1500 Watt Power Supply and External Power Supply Frame
© 2016 Imagine Communications Corp.
Proprietary and Confidential.
September 2016 | Page 264
Power Supply Modes
The Power Switch on the front of the power supply puts the power supply into
Standby
mode or
ON
mode.
In
Standby
mode, the power supply is energized internally but not driving power into the frame.
In
ON
mode, the power supply is supplying power to frame.
Once an AC power cord is attached to a power supply, its becomes energized (partially operational
internally).
Power Supplies in a 28 RU Frame
The 28 RU IP3 Frame (
PX-FR-28
) comes with
4
Power Supplies
(
PX-PS
) - 2 at the top of the frame (at
each corner) and 2 at the bottom of the frame (at each corner). See Installing Power Supplies (on page
270) for instructions on installing additional power supplies.
Figure 113:
Power Supplies at the top of a 28 RU IP3 Frame
Figure 114:
Power Supplies at the bottom of a 28 RU IP3 Frame
