Platinum™ IP3
Installation and Operation Manual
1500 Watt Power Supply and External Power Supply Frame
© 2016 Imagine Communications Corp.
Proprietary and Confidential.
September 2016 | Page 270
Installing Power Supplies
CAUTION
: The latch on the Power Supply (PX-PS) must be in the unlocked position (latch on the right
side of the slot) before it is slid into the frame. This prevents damage to the frame and latch.
Figure 120:
Power Supply with Latch in Unlocked Position
To install a Power Supply:
1.
Align a Power Supply (PX-PS) with the slot on the Frame.
2.
Gently slide the Power Supply (PX-PS) into place; it should snap into the Frame.
Figure 121:
Power Supply being inserted into Frame
3.
After the Power Supply (PX-PS) is fully inserted into the frame:
Loosen the thumbscrew on the latch of the Power Supply (turn counter-clockwise)
Push the latch on the Power Supply all the way to the left to lock the Power Supply into place
