Imagine NEO AS-3981-AD, Installation And Operator'S Manual

Page: 47 / 72

32 AS-3981-AD Installation and Operation Manual
Chapter 3: Operation
Enabling or Disabling an Alarm Parameter
To enable or disable an alarm parameter, follow these steps:
1. Select
Alarms , then select Config , and then press Enter .
2. Select one of the alarm parameters, and then press Enter .
3. Press Enabled or Disabled .
4. Press Enter to activate the selection.
Restoring Default Settings
To restore the alarms to their default settings, follow these steps:
1. Select
Alarms , select Config , and then press Enter .
2. Scroll down the list of alarms, and then select Reset.
3. Press Enter to activate the selection.
The following table lists the default alarms for the AS-3981-AD
module. You can enable or disable these settings, but you cannot change
the level of the alarm.
Table 3-3. AS-3981-AD Default Alarms
Card-Edge
Alarm ID
Name of Alarm Alarm
Level
Meaning
DARSPrsnt DARS Present Major Loss of DARS reference
DARSRefErr DARS Reference
Error Minor Error in the DARS
reference signal
GlVPrsnt Genlock Video
Present Major Loss of genlock video
reference
GlLocked Genlock locked Major Loss of locked reference