Imagine NEO AS-3981-AD, Installation And Operator'S Manual

Page: 40 / 72

AS-3981-AD Installation and Operation Manual 25
Chapter 3: Operation
Operator and All List Parameters
This complete list of parameter settings is arranged so that the settings
most likely requiring changes are placed at the top of the list. Items on
the bottom of the list are the least likely to require changing. Parameters
with the designation [RO] are “read-only.” An asterisk (*) indicates the
default user range or value.
The All List is a long flat list of all the available parameters, arranged
from the most-used to least-used. It is intended for a “Supervisor”
security designation. The Operator List is a condensed version of the
All List, and is intended for an “Operator” security designation. The
following table shows all available parameters. Parameters accessed
only from within the All List are shaded in gray.
See
“Navigating the Operator and All Lists” on page 24 for instructions
on navigating this list using card-edge controls.
Note
You can reset the default values
for all of the parameters
automatically via the
FctryRcl
parameter, found in this table.
Table 3-2. Operator and All List Parameters
Card-Edge ID
Parameter
Name
Function
User Range or
Options
SampleRate Sample Rate Sets the sample rate
• 32 kHz
• 44.1 kHz
• 48 kHz*
• 96 kHz
Delay_1A,
Delay_1B,
Delay_2A,
Delay_2B Delay in 1A
to
Delay in 2B Adjusts delay for input channel 1A to
Channel 2B
• 0 *to 1980.0 ms
@ 32 kHz
• 0* to 1436.7 ms
@ 44.1 kHz
• 0* to 1320.0 ms
@ 48 kHz
• 0* to 660.0 ms
@ 96 kHz
Gain_1A,
Gain_1B,
Gain_2A,
Gain_2B Gain in 1A
to
Gain in 2B Adjusts gain for input channel 1A through
to channel 2B -18.0 dB to 18.0 dB
(0 dB*)