Imagine NEO AS-3981-AD, Installation And Operator'S Manual

Page: 34 / 72

AS-3981-AD Installation and Operation Manual 19
Chapter 2: Installation and Removal
Rebooting the Module
Follow these steps to reboot the affected NEO module:
1. Click
Reboot Device , and then click Yes .
After the module has rebooted, a message box advises you to wait
until the device has rebooted.
2. Wait 30 seconds.
3. On the
Software Upgrade tab, select the /slotx/fl0 (where x is the
slot number) directory in the Select the device directory to
transfer to: field.
4. Click Add , and then browse and select the fl0 folder in the
module’s upgrade package.
5. Click OK .
6. Select the files shown in the Add Upgrade Files box, and then
click OK .
7. Select and delete unwanted files (for example: vxWorks.lzs ) in the
Add upgrade files for transfer to device: field by clicking
Remove .
8. Click Perform Transfer and then click Yes .
9. Wait for the message File transfer to device succeeded .
This may take a moment.
10. Click Reboot Device and then click Yes.
11. Wait 30 seconds, and then close the Configuration... box.
The module name appears at the card edge.
Note
Some NEO modules will reboot
automatically. In these cases,
the
Reboot button will be
grayed out. During this time, the
module’s card-edge display will
show the word
Rebooting
before the name of the module
appears. These modules do not
require the
fl0 file.
Caution
You must delete unwanted files
in the
Add upgrade files for
transfer to device: field before
transferring the files. Otherwise,
the upgrading procedure will
fail.