22
DQS6800
+
Installation and Operation Manual
Chapter 3: Operation
Operating Notes
When setting the control parameters on the DQS6800
+
, observe the
following:
•
If you make changes to certain parameters, other related parameters
may also be affected. See
“Changing Parameter Settings” on
for more information.
•
When you change a parameter, the effect is immediate. However,
the module requires up to 30 seconds to save the latest change.
After 30 seconds, the new settings are saved and will be restored if
the module loses power and must be restarted.
Q-SEE Compliant Thumbnails
When installed in an FR6802
+
QXF frame that also contains a
6800
+
ETH resource module, DQS6800
+
module control windows
have an extra
Streaming
tab in CCS Pilot and Navigator (version 3.2.1
or later). Here you can view output video from the module.
In addition, video from the DQS6800
+
, displayed at up to three frames
per second, can be displayed on the 6800
+
ETH’s control page, and (for
CCS Navigator only) on
Graphical Navigation
pages.
To choose the input source for the thumbnail, use the
Thumbnail
Insert
).
