30
DQS6800
+
Installation and Operation Manual
Chapter 3: Operation
Recalling Factory Default Parameter Settings
Reference Setting Parameters” on page 33
describes all of
the parameter settings for the DQS6800
+
, including the original factory
defaults. To return this module to its factory default settings, you can
either reset each parameter individually or do a global recall following
this procedure:
1. Rotate the hex switch to “0.”
2. Toggle the navigation switch to the bank number “0.”
Use the control LEDs to verify which bank you have selected, or
use an available 6800
+
software control option (serial/local or
Ethernet/remote) to aid in confirming your bank selection.
3. Rotate the hex switch to the global recall parameter “F
.
”
4. Toggle the navigation switch to “On.”
Use an available 6800
+
software control option to aid in viewing,
setting, and confirming the parameter value.
Reading Software and Hardware Versions
The current software version of your DQS6800
+
module can only be
viewed using a CCS-enabled control panel or a CCS software
application, such as Pilot or
+
Pilot Lite. See your
RCP-CCS-1U
Installation and Operation Manual,
CCS software application user
manual
,
or CCS software application online help for information on
viewing software and hardware version numbers.
Changing Parameter Settings Using Software
Before using software applications to change your module’s parameter
settings, you must refresh (
+
Pilot Lite) or discover (Pilot and
Navigator) the module. Refresh and Discovery are the processes by
which your software finds, and then connects to your module.
Refreshing Your Module Using
+
Pilot Lite
When using
+
Pilot Lite to change your DQS6800
+
control parameters,
you must “refresh” the control connection between your 6800
+
frame
and PC. To refresh the connection, from the
+
Pilot Lite menu bar,
select
File
>
Refresh
. For information about controlling a device using
+
Pilot Lite, see your
+
Pilot Lite
User Manual
.
