Imagine communications Selenio 6800 SFS6803+OP+SFS+, Installation And Operation Manual

Page: 18 / 118

Chapter 1
Introduction
4
Hardware
Options
All OP
+
SFS
+
R
+
D and OP
+
SFS
+
(C)xxD modules are shipped with standard SC/PC fibre
connectors. Other connectors are available (see Table 1-4 ).
Module Descriptions
SFS6803
+
and OP
+
SFS
+
hardware versions have minor variances in their specifications,
which are listed in Chapter 4, Specifications on page 79.
To determine which specifications apply to your module, see Reading Software and
Hardware Versions on page 47.
Front Module Figure 1-1 is a generic top-front view of a typical 6800
+
module and shows the general
location of standard LEDs, controls, and jumpers. The number of control and monitoring
LEDs on 6800
+
modules varies.
Figure 1-1 Typical 6800
+
Module
Table 1-5 on page 5 briefly describes generic 6800
+
LEDs, switches, and jumpers. See
Chapter 3, Operation for more information on specific SFS6803
+
and OP
+
SFS
+
module
controls, LEDs, and jumpers.
Table 1-4 Available Connectors
Item Description
OP
+
OPT
+
SC SC/PC fiber optic connectors (standard)
OP
+
OPT
+
ST ST/PC fiber optic connectors (optional)
OP
+
OPT
+
FC FC/PC fiber optic connectors (optional)
Modul
e
status Mode select
rotary Navigation
toggle
Monitoring
LEDs
Remote/local
control
Extractor
handle
Control
LEDs