OP
+
OER Installation and Operation Manual
9
Copyright © 2010, Harris Corporation
Chapter 2: Installation and Operation
Installing and Removing the Modules
Installation Overview
Front and back modules in the OPTO
+
series have plastic caps that
protect the fragile laser connections from damage. You must remove
these protective covers before you install the back and front modules
(see
Figure 2-2
).
In addition, all fiber optic connections must be inspected and cleaned
before they are assembled. Carefully follow the inspection and cleaning
steps described in the next pages. Additional safety information begins
on
“Laser Safety” on page 27
.
CAUTION
Ensure that you remove the fiber optic protective covers from the
front and back modules before installation. Take care to avoid
touching the fiber optic connections. Thoroughly clean the
connections before installation. Remove power from the frame
before installing or removing back modules.
Figure 2-2. Protective Covers for Laser Connectors
Remove these protective
covers
