background image

3

Congratulations for selecting the new IMAGE

¨

3.4C

recumbent cycle. Cycling is one of the most effective
exercises for increasing cardiovascular fitness, building
endurance, and toning the entire body. The IMAGE

¨

3.4C offers an impressive array of features designed
to let you enjoy this healthful exercise in the comfort
and privacy of your home. 

For your benefit, read this manual carefully before
you use the IMAGE

¨

3.4C.

If you have additional

questions, please call our Customer Service

Department toll-free at 1-800-999-3756, Monday
through Friday, 6 a.m. until 6 p.m. Mountain Time
(excluding holidays). To help us assist you, please
mention the product model number and serial number
when calling. The model number is IMEX36580. The
serial number can be found on a decal attached to
the IMAGE

¨

3.4C (see the front cover of this manual).

Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.

Pulse Sensor

Handlebar

Water Bottle

Holder (Bottle

not included)

FRONT

BACK

Seat 

Backrest

Seat Knob

Side Shield

Handlebar Post

Roller

Pedal

Pedal Strap

Console

Book Holder

Seat Handle

RIGHT SIDE

BEFORE YOU BEGIN

Summary of Contents for 3.4 C Bike

















Reviews: