Image Vault Pro-Command, Installation Manual

Page: 12 / 30

Image Vault® Pro-Command version 9.4.3
Installation Manual
Page | 12
Alarm Connection.
Connect the Image Vault® alarm outputs in accordance with the provided IVPTZAOC wiring diagram
(APPENDIX B). The Image Vault® DVR allows up to 16 alarm inputs. To connect external inputs you will
need a DB25 cable, or DB25 pin out connector. The pin out is in numerical order. Pin 1 is input 1, pin 2 is
input 2. This continues through input 16. Pins 17-25 are all “common” grounds. To initiate a trigger, short
any input to any common. Alongside programmed variables this will report an input event to the Image
Vault®.