15
Notice
●
This monitor has been adjusted specifically for use in the region to which it was
originally shipped. If the product is used outside the region, it may not operate in
the specifications.
●
Please wait 20-40 minutes after powering on the monitor before adjusting, as
it takes roughly this same amount of time for the optimum performance of the
electrical parts.
●
The screen may have defective pixels. These pixels may appear as slightly light or
dark area on the screen. This is due to the characteristics of the panel itself, and not
the monitor.
●
The backlight of the LCD panel has a fixed life span. When the screen becomes dark
or begins to flicker, please contact your dealer.
●
Do not press on the panel or edge of the frame strongly, as this may result in the
display malfunction, such as the interference patterns, etc. If pressure is continually
applied to the LCD panel, it may deteriorate or damage your LCD panel.
●
Do not scratch or press on the panel with any sharp objects, such as a pencil or pen
as this may result in damage on the panel. Do not attempt to brush with tissues as
this may scratch the LCD panel.
●
When you bring the monitor from cold temperature room into a high temperature
room or when your room temperature goes up quickly from low to high, dew
condensation may occur inside and outside the monitor. In this case, do not turn on
the monitor. Please wait till dew condensation disappears. Otherwise it may cause
some damages to the monitor.
●
Prolonged operation of an LCD with the same content on the same screen area
may result in a form of image retention. You can avoid or significantly reduce the
occurrence of this phenomenon by using a screen saver. You can activate a screen
saver in the “Display Properties” window of your workstation. We recommend setting
screen saver activation after 5 minutes of non-usage. In case you are working with
the same image or an application with static image elements for several hours
continuously (so that the screensaver is not activated), change the image content
regularly to avoid image retention of the static elements.
