XLED-3MPC_XLED-2MPC
USER’S MANUAL
5. Monitor Setting
All monitor settings are controlled on OSD. Please make sure that the OSD is in the
unlock state before adjustment.
1) Input Source set
Pressing the button toggles between DVI and DisplayPort input. The selected input
source message will appear on the OSD.
2) OSD Lock/Unlock
a. Lock out
Press button and hold for about 5 seconds, then the OSD lock message will ap-
pear if the OSD is locked out properly.
b. Unlock
Press
button and hold for about 5 seconds, then the OSD unlock message will
appear if the OSD is unlocked properly.
3) Brightness Adjustment
a. To activate menu
Press “ ” or “ ” button in OSD off.
b. Adjusting
Press “ ” or “ ” button for decrease
or increase value.
Brightenss Adjustment
0
100
Down
Up
50 %
4) LED Lamp brightness Adjustment
a. To activate menu
Press “ ” button for about 5 seconds
in OSD off.
b. Adjusting
Press “ ” or “ ” button for decrease
or increase value.
LED Lamp Brightness
0
100
50 %
Down
Up
