IMAGE Information Systems Ltd. MED-TAB v.1, User Manual

Page: 20 / 24

MED-TAB v.1 User Manual PUB INT EN – 003TR
20
iQ-
VIE
W
2.6.
0
Gru
ndl
ege
nde
Anf
ord
eru
nge
n
CO
NF
DE
-
001
D2
0
20
1. i
Q
-
V
6 Safety information

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or
moisture.

The MED-TAB is primarily for use in a health care facilities without direct contact to
patients (no applied part).

Do not connect this apparatus to household or consumer devices.

We will try the best to assure the newest information be shown in this manual, but the
information in this document is subject to change without prior notice.
6.1 Precautions

If the device emits smoke, smells like something is burning, or makes strange noise,
disconnect all power connections immediately and contact your dealer for advice.
Attempting to use a malfunctioning unit may result in fire, electric shock, or damage of
the device.

Do not open the case or modify it. Opening the case or modifying the device may result
in fire, electric shock, or burn.

Refer all service to manufacturer authorized qualified service personnel. Do not attempt
to service this product yourself as opening or removing covers may result in fire,
electric shock, or equipment damage.

If an object or liquid falls/spills into the cabinet, unplug the unit immediately. Have the
unit checked by a qualified service engineer before using it again.

Set up the unit in an appropriate location. Not doing so may result in fire, electric shock,
or damage of the device.
▫
Do not place the unit in a dusty or humid environment.
▫
Do not place the unit in a location where steam flows directly to the device.
▫
Do not place the unit near heat generating devices or a humidifier.
▫
Do not place the unit in an inflammable gas environment.

To avoid danger of suffocation, keep the plastic packing bags away from babies and
children.

To disconnect the power cord, grasp the plug firmly and pull. Tugging on the cord may
damage and result in fire or electric shock.

Use the correct voltage.
▫
The unit is designed for use with a specific voltage only. Connection to another
voltage than specified in this User Manual may cause fire, electric shock, or
equipment damage.
▫
Do not overload your power circuit, as this may result in fire or electric shock.