Seite
37
von
45
Image Engineering
Parameters
XXX
– backlight intensity in steps of 1%; can be set from 0 (OFF) to 100 (fully ON).
Example
To set intensity to 24 % call
LED-Panel.exe -setDisplayBrightness 24
6.2.20 Get the Intensity of the Display Back Light
Function
getDisplayBrightness
Description
With the function
“
LED-Panel.exe -getDisplayBrightness,
” it is possible to read the intensity of
the backlight illumination of the LCD display.
Return Parameters
After executing the function
“
LED-Panel.exe
-
getDisplayBrightness,
” the device will return a
one-, two- or three-digits value of the backlight intensity in %.
For instance:
Return value
27
means that the intensity of the backlight is 27%.
Return value
0
means that the backlight is turned OFF.
Return value
100
means that the intensity of the backlight is 100%.
6.2.21 Set the Direction of the LEDs for
“Response Time” and “Exposure
Time” Modes
Function
setDirectionSingle <X>
Description
“
LED-Panel.exe -setDirectionSingle <X>
” switches the desired moving direction of the LEDs.
There are eight possible directions.
Parameters
<X>
Description
1
Starting from the top left, run from left to right and to the bottom
2
Starting from the top right, run from right to left and to the bottom
