Seite
19
von
45
Image Engineering
The graphical user interface (GUI) is divided into three major parts (see Figure 15)
•
the file list and the setting control panel (Figure 15,
①
&
②
)
•
the image view (Figure 15,
③
)
•
the results and the meta data view (Figure 15,
④
&
⑤
).
Note: After putting the LED-Panel into sleep mode, it will wake up after switching off/on the
power, disconnecting the USB cable, or after the PC shuts down/power-up. To wake up from
the PC, use an according command. To wake up manually, switch off the LED-Panel, push the
MODE button, hold it, and then switch on the power.
5.5.1 File list
The file list is located on the top left side of the GUI. Add your images taken from LED-Panel V4
to the list.
The file list can contain different file types such as
JPEG, PNG, TIFF, and BMP. You can load single
images or a whole folder by simply dragging and
dropping them onto the file list (Figure 16) or using
the file browser by clicking the add-button below the
list.
The images are arranged in a
“Measurement” tree
structure, sorted in ascending order. So, each image
belongs to a measurement. You can create a new
measurement by dropping images on the empty area
or using the plus sign button. To add an image to an
existing measurement, drag and drop it over the file
names of the desired measurement or right-click on
this measurement to open a context menu.
Select it and click the delete-button (Figure 16) or
press “Delete” on your keyboard to delete a single
file. By clicking the trash-bin-button, the entire file list
gets cleared.
The arrow button in the top right corner will hide or
display all files in the list.
The icon next to the file name indicates the current
image status. There are three different states:
Image not yet processed
Image successfully processed
Detection failed or an error occurred during analysis (a message box will show up with
further details)
Figure 16
