Image Engineering
Seite
7
von
11
Wiring examples for the trigger output:
Trigger OUT wiring examples
The default duration value for the trigger output is 500 ms. This value can be modified with the iQ-LED API. A
signal is sent out to the trigger output while changing the illuminates or the intensity of LED channels. It can be
used to synchronize your test setup. For example, with an iQ-Trigger (see 2.1 optional equipment).
3.2 Connecting the hardware
Connect the power cord to the power outlet on your LE7. Connect the LE7 USB cable to your PC and turn on the
LE7 (the power switch is next to the power outlet). Then connect the USB cable from the spectrometer
calibration device to your LE7. The system will install the spectrometer and iQ-LED driver on your PC (this will
take a few seconds). You can check the installation in your hardware manager:
Hardware Manager: active iQ
–LED devices and spectrometer
