Page 44
Operation Manual
E.1.2
Operation Info
In the section
Device Information
, click the button Operation Info and the following list
will show various scan counters and elapsed times.
Picture 24: Operation Info screen
The following table provides a brief description of the operation information.
Field
Description
Scan Count
The total number of scans performed since the scanner left
the factory. Each CCD scan cycle is counted, regardless of
it being a pre-scan or a full scan.
Power Up Cycles
The total number of power up cycles performed since the
scanner left the factory. Only the power up cycles are
counted which were invoked by the on/off button.
Job count
The total number of job mode activations for scanning.
Operating Time
The total operating time since the scanner left the factory.
This is the power on time only, standby time does not count.
Lamp Operating Time
The total lamp operating time since the scanner left the
factory.
Remaining Lamp Operating
Time
The typical remaining lifetime of the lamps. With normal
working conditions, the lamp life is sufficient for the lifetime
of the device.
To return to the
USER
screen, click the button Back to Main Menu
or click on the “Return”
button in your browser.
To return to the
Login
screen click the button
Setup Menu
Click the button Launch Scan Application to switch directly to the main screen of the
integrated ScanWizard user interface.
