Page 12
Operation Manual
A.2
Safety Precautions
Warning:
Please read all the safety precautions before you operate the scanner. Serious
injury can occur to you or to others if you do not know how to use it safely.
To prevent fire or shock hazard,
do not expose
this device to rain or
any type of moisture.
Follow all safety precautions to avoid personal injury or damage to the device.
1.
Openings in the scanner’s housing are provided for air circulation. Do not cover or block
the openings.
2. Do not place the scanner near a heat or cold emitting source such as a space heater,
furnace, or air conditioning unit.
3. Do not place the scanner near any devices or electrical boxes emitting high voltage.
4. Always place the scanner on a stable surface.
5. Do not place cups containing liquids or other such objects on the scanner or on the
book cradles. If liquid spills into the scanner it can cause damage. If this occurs, turn
the scanner off, unplug the power cord from the wall receptacle and contact the
Image Access Technical Support.
6. Do not put any objects into any scanner housing openings unless specifically instructed
to do so by Image Access Technical Support.
7. Do not disassemble the scanner. If there is a need to disassemble the scanner, please
contact the Image Access Technical Support.
8. Do not use the scanner if it has been physically damaged. If this occurs, turn the
scanner off, unplug the power cord from the wall receptacle and contact the
Image Access Technical Support.
9. The scanner should be used only with the power supply that is delivered with the
scanner. If you are unsure, please contact the Image Access Technical Support.
10. Image Access recommends plugging the scanner into an appropriately-rated power
conditioner.
11. Always turn the power off and unplug the power cord from the wall receptacle before
cleaning the scanner.
12. When cleaning, do not use any type of solutions, abrasives, or acids such as acetone,
benzene, kerosene, mineral spirits, ammonia, or nitric acid. Do not use any cleaners
that contain these chemicals.
13. Do not spray any liquids directly onto the scanner. Spray cleaning fluids directly onto
the cleaning cloth and use the cloth to clean the scanner.
