ILVE 645SNHSW-BRZ, Use And Maintenance

Page: 12 / 44

12
At the end of the automatic program, the “A” symbol will flash.
The buzzer will sound, the oven and the pan symbol will turn off. with the end time
less the cooking time. At the end of the automatic program, the “
A
” symbol will
flash. The buzzer will sound, the oven and the pan symbol will turn off.
Select the timer function (button
A
[–]/[+]
) and set the end time with the +/- buttons.
During the set time the bell symbol
A
[–]/[+]
will remain lit. When the time comes to an
end, the buzzer will sound.
The buzzer operates at the end of the cooking duration and timer function, and
remains active for 7 minutes.
The buzzer can be stopped by pressing any button
A
[–]/[+]
A
[–]/[+]
A
[–]/[+]
.
The intensity of the buzzer can be changed by pressing the “-” button without se-
lecting a function. You can choose from 3 different sound intensities and duration
depends on the time pressure is exerted on the button “-”.
The selected program starts after the time has been set. The time remaining can
be displayed at any time by selecting the corresponding function again.
There is a programming error if the time shown by the clock is between the co-
oking start time and the cooking end time.
The error is signaled by the buzzer sounding and by the intermittent flashing of
the symbol “
A
”.
The cancellation of a program is done by selecting the manual mode. At the end
of the selected program, this will automatically cancel.
Timer
Buzzer
Starting a program and
control
Identifying a
programming error
Cancellation of a
program
INSTRUCTIONS FOR USE
MP models with 5 key programmer