4
HARDWARE AND ACCESSORIES
The iL9X can be hung from steel
cables or can be mounted to a
rack.
Before you begin installation,
check that you have all the
necessary parts to begin.
1 iL9X Fixture
1 Power Cable
4 Steel Hanging Cables with attached
cylindrical locks for hanging
IN THE BOX
1-877-540-5588
iluminarlighting.com
CONNECTION INSTRUCTIONS
Lay the central mast on a flat table top or surface with the
attachment brackets facing UP. Attach each LED Bar by aligning
the plastic clips and carefully sliding them into place until you
hear a soft click.
Once the plastic clips are all snapped in place, attach the A/C
cables coming from the mast to each LED bar by aligning the
connector pins and pressing the ends together. Lock by twisting in
opposite directions.
Once all the LED bars are fastened into place and A/C cables are
attached to the mast, turn the fixture over (this may require more
than one person). Ensure the flat surface is clear of anything that
could damage the delicate diodes.
SLIDE
2
1
3
5
© Copyright 2020, ILUMINAR Lighting
Subject to change without notice.
!
CAUTION
when handling your ILUMINAR iL Fixture.
The LED array should NOT come in contact with sharp
objects. DO NOT touch diodes or apply direct force to the
diodes as this can/will cause permanent damage.
