THANK YOU
for purchasing an
ILUMINAR Lighting Remote
Ballast
. We strive to deliver the best customer service alongside
world-class products and we go above and beyond to make sure
you are beyond satisfied with your purchase. The following is a
general set of warnings and basic guidelines for the ILUMINAR
remote ballasts. Always have an expert install your product(s)
when possible.
KEEP ORIGINAL PACKAGING
In the event of a return, products will need to be in the original
ILUMINAR packaging to avoid product damage during shipping.
Any damage to products not in their original packaging will not
be covered under Warranty. To read more about our product
warranty, visit www.iluminarlighting.com/warranty.
SAFETY 1ST
FAILURE TO OBSERVE THE FOLLOWING WARNINGS COULD
RESULT IN ELECTRICAL SHOCK AND SERIOUS INJURY. Additionally,
failure to follow these safety warnings can/will result in a void all
warranties as well as any manufacturer liability.
Please read carefully prior to beginning installation.
This ballast is compatible only with the ILUMINAR Lighting fixtures. Do not connect any
other device to the Control Port. Any attempt to connect it to an incompatible fixture may
result in damage to the ballast and will void the warranty.
This ballast is intended for indoor and greenhouse applications only. Position it in an area
away from excessive heat or contact with liquids.
Make sure the power cord and lamp cord are correctly connected.
For remote operations, use this ballast with a maximum power cable of 15 feet (240v
Nema provided).
Lamps with built-in igniters will not work with this ballast. Not for use with external ignitors.
Disconnect the ballast from the power supply prior moving the unit or performing any
maintenance or lamp changes.
DO NOT open the ballast case, it will void the warranty.
DO NOT support the ballast by power cord(s) and/or lamp cord(s). These cords/connections
are not designed to bear weight.
DO NOT make contact with the interior of the socket while power is on.
DO NOT plug the system into untested or unidentified voltage other than what is
designated on ballast.
DO NOT attempt to rewire, alter, modify or reconfigure your system - this will void the
ILUMINAR warranty and could cause serious safety hazards, or cause bodily injury or
death, as this is a high amperage and voltage device.
DO NOT submerge in water.
DO NOT EVER CONNECT A CMH BALLAST to a Flip Box. It will void the warranty and can
cause electrical failure within the CMH Ballast. Flip or Switch Boxes are not recommended
for any CMH Units or for any high wattage ballasts.
DO NOT plug or unplug the lamp cord while the ballast is connected to power.
Keep away from Children.
This product contains delicate electronic components. If it is placed near an object that
transmits radio signals, it could cause interference (i.e.: mobile devices, walkie talkies, CB
radios, remote controls and microwaves). If interference occurs, move such objects away
from the appliance.
WARNINGS
