P
12
Sequences
Sequences allow you to link a number of individual
actions together, with or without a time delay between
each, in order to cause multiple operations from a single
trigger action. The SI-2 can store up to sixteen sequenc-
es of its own (each with up to 128 steps) that can be
triggered by an action via the iCANnet network.
Note: Sequence numbers monitored from 1 to 16 within
the ‘Output Actions’ page coincide with the sequences
that may be programmed within the SI-2 unit itself. If a
sequence number below 17 is monitored to cause an
output action and is also used as an SI-2-contained se-
quence, then both events will take place simultaneously.
To define a sequence
1 Click on the ‘Sequences’ tab to display the page.
2 Right click within the main panel area to display a
popup menu. Select the ‘Add’ option to add a step
to the sequence.
3 Optionally alter the delay option (introduces a time
delay before the current action is launched).
4 Click the ‘Action Type’ down arrow and select the
required action form the list. Depending upon the
chosen action, one or more of the ‘Param’ columns
to the right will show their own selection options. You
can use these to further define the selected action.
5 Repeat steps 2 to 4 for each required step within
the sequence. When all have been configured, either
click the Apply button to save without closing the
window or click the OK button to save and close.
Summary of Contents for SI-2
Page 1: ...SI 2 System Integrator Installation guide S I 2 N A...
Page 2: ......
