Illustra Pro Compact Mini-Bullet Quick Start Manual Download Page 19

Network Connection and Configuration 

 

15 

 

Type 3: Remote Connection via the Internet   

If the network where the camera resides is connected to the Internet, you can also provide remote 
access to your camera over the Internet.   

Typically a broadband router has built-in DHCP function to assign a local IP address to your camera. 
You can alternatively assign a fixed IP address to the camera to prevent it from frequent changing. 

 

To access the camera from a local PC, simply use the local IP address of the camera.   

To enable remote access, you must configure your router/firewall to forward an incoming request to 
that fixed local IP address of the camera. Therefore, when an external host sends a request to access 
your camera, the request will first reach the router’s external IP address and then be forwarded to the 
local IP address of the camera. 

Port forwarding is based on the service you want to provide. For example, forward HTTP port to enable 
remote web access to your camera, or RTSP port to enable access to video/audio streams from the 
camera.   

Accessing the Camera for the First Time 

The camera comes with a web-based setup utility, allowing you to view the video of the camera and 
configure the camera for optimal use in your environment. 

 
To access the camera’s web-based control utility, you need a PC that meets the following 
requirements:   

 

Operating System

: Windows Vista or Windows 7, Windows 8 and Mac OS   

 

Browser

: Internet Explorer Version 8.0 or later, Chrome, Safari and Firefox 

 

CPU

: Intel Core 2 duo P8400 or higher   

 

VGA

: DirectX 3D supported (*If Direct3D Acceleration is disabled, type 

‘dxdiag’ from 

Start >Run

 on your computer, and check the DirectX Features.) 

 

RAM

: DDR3 4GB or more   

 

Others

: Java (

http://java.com/en/download/index.jsp

) + QuickTime 

Then, take the following steps to connect your PC to the camera. 

Step 1: Make the connection   

For initial setup purpose, connect one end of an Ethernet cable to the RJ45 connector of the camera 
and the other end to the LAN port on your PC. 

Step 2: Configure your PC’s IP address   

Configure the IP address of your PC referring to Network Connection Types on page 4. 

Summary of Contents for Pro Compact Mini-Bullet























Reviews: