Illustra Flex 3MP and 8MP Outdoor Bullet Quick Start Guide
5
8200-1456-03 G0
Table 8 Descriptions of the interior buttons and ports of the Illustra Flex Bullet camera
Index number
Name
1
Micro SD card slot
2
Serial port
3
Default: returns to factory default by pressing the button for five seconds
4
Reset: system restart
CAUTION
When removing the screws for the default/reset cover, ensure you replace and tighten the
screws to avoid water leaking after adjustment.
NOTE
Connectors and field wiring terminals for external Class 2 circuits provided with marking
indicating minimum Class of wiring should be used. Class 2 should be marked adjacent to the
field wiring terminals.
Installation
In the box
Check everything in the packing box matches to the order form and the packing slip. In addition to
this guide, items below are included in the packing box:
• 1 Network Illustra Flex IR Bullet Camera
• 1 printed Quick Start Guide
• 1 printed Regulatory document
• 4 31mm screws and anchors
• 1 installation template sticker
• 1 Torx 10 and 20 Security L-Key (3MP IK7 Bullet camera)
• 1 T10-T10 Security L-Key (3MP IK10 and 8MP IK9 & IK10 Bullet cameras)
Contact your dealer if any item is missing.
Installation tools
The following tools assist with installation:
• a drill
• screwdrivers
• wire cutters
Checking appearance
When first unboxing, check whether if there is any visible damage to the appearance of the unit and
its accessories. The protective materials used for the packaging should be able to protect the unit
from most types of accidents during transportation.
