Illustra Flex 3MP and 8MP Outdoor Bullet Quick Start Guide
7
8200-1456-03 G0
Figure 11 Mounting the Illustra Flex 3MP (IFS03B1BNWIT) Bullet camera to a wall
Figure 12 Mounting the Illustra Flex 3MP (IFS03B1ONWIT) and 8MP Bullet cameras to a wall
WARNING
Depending on the material of mounting surface, different screws and anchors than those supplied
with the product may be required. To prevent the unit from falling off the surface, ensure that it is
mounted to a firm location (ceiling slab or channel) using a safety wire strong enough to withstand
the total weight of the unit. Be aware of the finishing at the end of the wire.
CAUTION
Safety wire should be connected, if supplied or ordered seperately, with one end the wall or ceiling
and the other to the safety-cord screw of the unit. By cabling so, it is possible to prevent the unit
from accidental falling in a sudden at any time.
- End -
