Illusonic IAP4, Owner'S Manual

Page: 51 / 60

Illusonic IAP 4 Chapter 9
Menu: System
49
9
Menu: System
MENU
SYSTEM
FACTORY DEFAULT
MENU
SYSTEM
STANDBY LED
MENU
SYSTEM
NETWORK
MENU
SYSTEM
FIRMWARE VERSION
MENU
SYSTEM
MEASUREMENT
MENU
SYSTEM
REMOTE PAIRING
MENU
SYSTEM
DISPLAY
The System menu features various general settings. The figure above illus-
trates the System menu and selection of its sub-menus.
1
The sub-menus are:
1 Sub-menus are selected by using
Rotary (Turn) .
Select (Rotary Push) enters a sub-menu and Menu
exits it.
DISPLAY
SLEEP
OFF
DISPLAY
BRIGHTNESS
||||||||||||||||||||||||||||||
< >
This menu contains display related settings:
– Brightness
Adjusts the brightness of the built-in display.
– Sleep
If Display Sleep is On, the display will go off
after 5 seconds of user inactivity (in Menu mode
and Sound Settings the display does not go off).
2 Remote control
Menu and Select buttons:
MENU
Select
Menu
REMOTE PAIRING
PAIR...
On the remote control, press for a few seconds
Select and Menu simultaneously.
2
Then, this menu
indicates with “On, ID
· · ·
” that the remote control
is paired with the Processor. Choose “Pair...” to
remove pairing.
In case you need to pair with an automation system,
press
>
, such that “On, ID 0” shows (IAP remote
control codes have an ID of zero).