Illusonic
IAP
Chapter 6
Loudspeaker Setups
35
Multiroom is configured as follows. Select your main loudspeaker setup (Room
1) without channel copies (only Sub copies are allowed, copy Sub to left-
most free IAP outputs). Now copy the channels for Room 2, starting with
FL. If you have FC and Sub in Room 1 but not Room 2, you need to copy
these to each channel of Room 2 (such that IAP downmixes the signals, -3dB
downmix gain is automatically applied). On the left, a complex example with
3 rooms is given (Room 1: 3.2, Room 2: stereo, Room 3: mono).
Multiroom configuration example: choose loudspeaker
setup, Multi-Room on, and copy channels for the
additional rooms.
Room 1: 3.2
FL 1, FR 1, FC 1
SUB 1, SUB 1
Room 2: stereo
FL 2, FR 2
Room 3: mono
FL+FR 3
IAP Configuration’s General Panel shows IAP’s output
channel map.
6.3
Loudspeaker Setups Details
The figure below illustrates 10 horizontal, 9 height, and top (T)loudspeaker
positions. The supported loudspeaker setups use loudspeakers at a subset
of these positions.
RLC
RL
FLW
FL
FC
FR
RC
RRC
RR
FRW
RLCH
T
RLH
FLWH
FLH
FRH
RCH
RRCH
RRH
FRWH
