12
Illusonic
IAP
Chapter 2
Getting Started
Step 5:
Using IAP
2
4
3
1
5
1. Push the rotary to switch IAP on.
2. Select an input source, using the
< >
buttons below the display.
3. Adjust the volume by turning the rotary control on the right.
4. Play sound with the selected input source.
5. Once you are done, push the rotary control for two seconds
to put IAP to standby.
1
1 When you set the main power switch to off or
disconnect the main AC power, without going to
standby first, IAP does not save its current settings.
To get more familiar with usage of IAP, continue with Chapter 3.
