Mounting
Commission (link) the switch to the
compatible system before mounting.
The light switch is compatible with standard
decorator style faceplates.
A faceplate is included.
Surface Mount
For surface mount, attach included backplate
to the wall using screws or adhesive.
Flush Mount
For flush mount, mount the switch without
the backplate into either a standard electrical
switch box or a low voltage mounting bracket
using included screws.
AHD0612B
Dual Rocker Self-Powered
ZigBee® Switch
ZBT-S2AWH (dual rocker, white)
Overview
The Dual Rocker Self-Powered ZigBee Switch
is a wireless transmitter that communicates with
a wide variety of ZigBee compatible systems.
The switch uses battery-free, energy harvesting
technology. Every time the switch is pressed
a micro-generator produces a small electrical
current that powers a built-in transmitter. This
transmitter sends wireless radio signals that are
used to remotely control a compatible system.
Compatible With
ZigBee Green Power
(included in ZigBee 3.0)
Lindon, UT• www.ILLUMRA.com • 801-349-1200
Specifications
ZBT-S1AWH
Single Rocker Self-Powered
ZigBee Switch
Range
30-100 ft or 10-30 m (typical)
Frequency
2.4 GHz (ZigBee channels 11-26)
Power Supply
Self-generated when switch is pressed
Buttons
4 (2 rockers)
Dimensions
2.75 (W) x 4.5 (H) x 0.62 (D) inches
Operating
Temperature
-13º to +149º F
(-25º to +65º C)
Radio
Certifications
Certified according to FCC, IC and CE
regulations
Addressing
Factory Set Unique ID
Contains FCC ID: SVZ-PTM215Z
Contains IC: 5713A-PTM215Z
The enclosed device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (i.) this device may not cause harmful
interference and (ii.) this device must accept any interference received, including
interference that may cause undesired operation.
Always follow local electrical codes when installing this device. Installation should
be performed by a qualified electrician.
This device or certain aspects thereof is protected by at least one of the U.S. or
international patent or has at least one such patent application pending.
