OPERATION
Page 4
1.
Open the protective cap (Part 8) and push the plug into charging socket (Part 7).
2.
Plug the adapter into a suitable outlet. Do not use an extension cord. The light on the adapter
(Part A) turns red to show that the battery is charging.
3.
When charging is completed, the light will change from red to green.
4.
Light can also be used during recharging cvycle as a corded work light.
NOTE:
Place the protective cap back onto the charging socket to prevent dust or water from entering.
ADJUSTING THE STAND
The stand (Part 3) is easily adjusted by tilting either up or down depending on your needs.
NOTE:
To avoid damaging the stand, do not over-extend the range at which it can tilt.
FIG 5
FIG 3
FIG 4
8
ON/OFF SWITCH
The work light is equipped with an ON/OFF switch button (Part 6) that is located at the
back, which can adjust the brightness.
• Press the button once: 25% brightness;
• Second press: 100% brightness;
• Third press: Light turns off.
WARNING:
Do not stare directly at the light beam. Never aim the beam at any person or object
other than the area you need lit.
MAINTENANCE
Your work light requires very little care and maintenance. Simply clean the lens regularly with a
non-abrasive cleaner. Store in a dry and frost-free place; the ambient temperature should
not exceed 40°C.
WARNING:
Always make sure the work light is off and completely cool before attempting to clean it.
Do not dispose of electrical appliances as unsorted municipal waste; use separate collection
facilities. Contact your local government for information regarding the collection systems
available. If electrical appliances are disposed of in landfills or dumps, hazardous substances
can leak into the groundwater and get into the food chain, damaging your health and well-being.
6
FIG 6
5
