SECTION 3 Specifications
Discharge Time*:
1,000 – 100V < 3 seconds at 12 inches (30.5 cm)
1,000 – 5V < 5 seconds at 12 inches (30.5 cm)
Offset Voltage*:
±
3V from set point, set point adjustable to 0V.
OPERATION SPECIFICATIONS
Max. Current Draw:
0.6 A
Line Voltage:
100-240 VAC, 50/60Hz
AC Adapter:
Universal input 24VDC output with IEC 320 input with grounded
secondary.
Coverage Area:
1’ x 4’ Area Coverage
Ambient Temp:
32
°
F (0
°
C) to 122
°
F (50
°
C)
Air Flow Volume:
Low Fan Speed 50 CFM (23 l/s); High Fan Speed 90 CFM (42 l/s)
Audible Noise:
Low Fan Speed 48 dB(A); High Fan Speed 58 dB(A) measured 2ft.
(61 cm) from unit.
OFF/ON:
Rear panel ON/OFF switch
Fan Speed:
Adjusted using a potentiometer adjustment tool. Adjustment located on
the rear panel of the unit.
Offset Balance:
Adjustable to zero, using a potentiometer adjustment tool. Adjustment
access is located (recessed) on the rear panel of the unit.
Indicators:
A green light indicates power on.
Fault light is normally off. A red light indicates an error condition.
(Optional: audible signal)
Reset:
Automatic
Maintenance:
Rotate emitter cleaner knob clockwise one revolution and release.
MECHANICAL SPECIFICATIONS
Emitters:
Machined tungsten
Enclosure:
Aluminum
Finish:
Gloss white polyester
Dimensions:
9 1/2 x 8 x 3 3/8 inches (24 x 20 x 9cm)
Total Weight:
4.25 lbs. (1.9 kg.)
Mount:
Stainless steel stand
Approvals Pending:
UL, CUL and CE
* Tested in accordance with ESD-STM3.1-2000, IONIZATION. Tested at 12 inches (30.5cm) on centerline
.
3
