ZK840 Grading Application User Instructions
29
6.3 Totals key
6.2.4 RESET key
Resets the entire supervisor to defaults and clears the PLU database.
6.3 Totals key
Use this to enable or disable these two items or to select the report format:
Print Totals Enabled
Enable this to print totals when you press and hold the
key.
Clear Totals Enabled
Enable this to clear totals when you press and hold the
key.
Report Format
Use this to key in a print format number (1-40).
6.4 Battery key
Press this to choose the following:
Battery type
Choices are
NONE
,
BSQ
and
OTHER
.
Shutdown Timer
Key in the number of minutes of inactivity which will cause the
indicator to shutdown.
6.5 Creating a PLU entry
To create a PLU you must configure or define its contents by enabling fields which will
appear in the database. See
. Once the PLU fields have been
enabled you can begin to create PLUs
1.
After configuring the PLUs, from the
Supervisor Setup
screen, press this key
sequence to access the database and start adding new PLUs:
DBASE
>
EDIT
>
PLU
>
ADD
The following screen is displayed:
