10
Install the fan assembly to the mount bracket as shown below:
Remove the two set screws from the downrod
and retain for reinstallation.
Install the
(H4)
mounting pin
by aligning the holes in the downrod support with holes in the downrod. Secure pin
with (H6) cotter pin. Install and tighten the two set screws with nuts in the downrod support.
WARNING
It is critical that the mounting pin in the downrod support is properly installed and the set screws and
nuts are securely tightened. Failure to do so could result in the fan falling.
Route wires and safety cable through
downrod cover, canopy cover and ceiling
canopy. Install the downrod with motor
assembly through the canopy, canopy
cover and downrod cover.
Installed in
the part
already
