11
Clock, Sleep Timer & Alarm
Cancelling the Alarm
1. After the alarm has sounded press the
Power
button to cancel it.
2. Press and hold the
Alarm
button to turn it off entirely.
The alarm indicator on the display will disappear.
Setting the Clock
1. With the unit powered off, press the
Clock Set/Mem
button on the unit, or the
Clock
button on the remote.
2. The hour will begin flashing on the display. Press the
Skip/Tune
buttons on the unit or the remote to set the
hour.
Be sure to note the PM indicator on the display.
3. Press the
Clock Set/Mem or Clock
button again.
4. The minutes will begin flashing on the display. Repeat
Step 2
to set the minutes.
5. Press the
Clock Set/Mem or Clock
button again to finish setting the time.
Setting the Alarm
1. With the unit powered OFF, press the
Alarm
button on the unit or the remote.
2. The hour will begin flashing on the display. Press the
Skip/Tune
buttons on the unit or the remote to set the
hour.
Be sure to note the PM indicator on the display.
3. Press the
Alarm
button again.
4. The minutes will begin flashing on the display. Repeat
Step 2
to set the minutes.
5. Press the
Alarm
button again to set the alarm type.
6. The alarm type will begin flashing on the display. Repeat
Step 2
to set the alarm type:
Radio, CD or Buzzer.
7. Press the
Alarm
button again to finish setting the alarm.
Setting the Sleep Timer
1. With the unit powered ON, press the
Sleep
button on the remote.
The display will show the amount of time in
minutes before the timer goes off.
2. Press the
Sleep
button to select the amount of time before the timer goes off: 90 minutes, 80, 70, etc.
3. Wait for the display to return to normal.
“Sleep” will be visible on the display when the timer is on.
4. To turn the Sleep Timer off, perform Step 2 until the display reads
“OFF”.
IHB248-2048-01-IB-Lab.indd 11
24/01/2018 9:49:29 AM
