10
CD & Radio
Playing the AM/FM Radio
This unit features an internal AM antenna and a pigtail FM antenna. To improve radio reception, adjust the position of
the unit.
1. Set the
Source
to
AM or FM mode.
2. Use the
Skip/Tune
buttons to manually tune to a desired radio frequency.
Programming Radio Station Presets Manually
1. Use the
Skip/Tune
buttons to manually tune to a desired radio frequency.
2. Press
Prog/Mem
on the remote.
3. Use
M −/+
to select a memory preset (P01-P20).
4. Press
Prog/Mem
to confirm and save the station.
Loading and Playing a CD
1. Press
Open/Close
on the CD door and place a CD in the tray, label side facing out, then close the CD tray.
2. Set the
Source
to
CD mode.
3. Use the controls on the unit or the remote to begin playing the loaded disc.
Programming a CD
1. Press the
Stop
button to stop a loaded CD.
2. Press the
Prog
button on the remote ("P01” will blink on the display).
3. Press the
Skip Back/Fwd
buttons to select a track.
4. Press the
Prog
button to add the selected track to the program. Repeat this process to program up to 20 tracks
to play in a specified order.
5. Press the
Play
button to begin the program. Press the
Skip
buttons to advance or reverse through the program.
6. Press the
Stop
button at any time to cancel the program.
Automatically Programming Radio Station Presets
1. In
AM or FM mode,
press and hold the
Play/Scan
button on the unit or the remote. The unit will scan for radio
stations and automatically save up to 20 memory presets (P01-P20).
2. Press the
Mem
−/+
button to cycle through your memory presets.
IHB248-2048-01-IB-Lab.indd 10
24/01/2018 9:49:29 AM
