![background image](http://html.mh-extra.com/html/ilive/ih818b/ih818b_instruction-manual_2043529012.webp)
Using the Component Input
1
When connecting two products using a component video cable, match the colored
ports with the same colored connection. (Green to Green, Red to Red, and Blue to
Blue)
1. Connect a component video cable (not included) to the Component Video Outputs
on the unit and the component video inputs on a Television
. Connect an RCA Cable to the RCA Audio Outputs on the unit to the audio inputs
on a Television.
3. Turn the unit on by pressing the
Standby Button
.
4. Change the Video Out setting on the unit to Component for Y,Cb,Cr connections or
P-Scan for Y, Pb, Pr connections. (See “The Setup Menu” on page 14 & 15).
5. Change the television to the correct video input setting.
6. Video and audio played through the unit will now be seen on the connected
television.
In Stop Mode, press the Video button on the remote control to cycle through S-
Video, Component, and P-Scan video output modes.
Summary of Contents for IH818B
