To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at:
www.iliveelectronics.com
Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes, visite la sección
de apoyo en:
www.iliveelectronics.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des questions fréquemment
posées, consultez la rubrique d’assistance sur:
www.iliveelectronics.com
For Warranty Information and the most up-to-date version of this User’s Guide, go to
www.iliveelectronics.com
Customer Service:
1-888-999-4215
| Email Support:
| Email Parts:
Copyright © 2018 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective
owners. Specifications are subject to change without notice.
International Support
Protect for Today
Sustain for Tomorrow
Made
Green
Saving Radio Presets
1. Press Scan to automatically scan and set radio presets.
2. To manually set a preset, tune to the desired frequency (see above steps).
3. Press and hold the
Prog
button. The display will begin flashing a preset.
Ex: "P01".
4. Press the
/−
buttons to select the preset to be saved.
(P01 to P20).
5. Press the
Prog
button to save that preset.
6. To cycle through presets, press the
Prog
button, then the
/−
buttons to select.
Power & Charging
Requires 2 AAA, 1.5V batteries (not included).
Plug the AC power cord into a standard power outlet.
Clock
Setting the Clock
1. With the unit OFF, press and hold the
Clock
button until the hour begins flashing.
2. Press the
/−
buttons to adjust the hour.
Note the AM/PM indicators on the
display.
3. Press the
Clock
button to proceed.
4. Press the
/−
buttons to adjust the minute.
5. Press the
Clock
button to finish setting the time.
Alarm & Sleep Timer
Setting the Alarm
1. With the unit OFF, press and hold the
Alarm 1
button until the Hour begins flashing.
2. Press the
/−
buttons to adjust the hour.
Note the AM/PM indicators on the display.
3. Press the
Alarm 1
button.
4. Press the
/−
buttons to adjust the minute.
5. Press the
Alarm 1
button.
6. Press the
/−
buttons to set the alarm for Radio or Buzzer.
7. Press the
Alarm 1
button.
8. Press the
/−
buttons to set the volume level for the alarm.
9. Press the
Alarm 1
button to finish setting the alarm time. Once the set alarm time is
reached, the alarm will sound.
10.
To set Alarm 2, follow the above steps using the Alarm 2 button.
Snooze and Alarm Reset
After the alarm sounds:
Press the
Snooze
button to delay the alarm for several minutes.
OR
Press the
Power
button to turn the alarm off until the set alarm
time is reached again.
Disabling the Alarm
Press the
Alarm 1
or
Alarm 2
buttons to turn the alarm ON or OFF. Note the indicator in the
display.
FM Radio
Tuning the FM Radio
1. Press the
Power
button to turn the unit on.
2. Press the
Source
button to switch to
Radio mode
, then press the
/−
buttons
to select the desired frequency, or press and hold to quickly scan the frequencies.
Aux In
Requires a 3.5mm audio cable (not included).
1. With the unit powered ON, connect a 3.5mm audio cable to the
Aux In
on the rear of
the unit and the
audio output
on an audio device.
2. Press the
Source
button to select Aux-In Mode. Use the controls on the connected
device to play your audio through the unit.
Setting the Sleep Timer
1. Press the
Sleep
button to set the sleep timer (90, 80, 70, 60... min or OFF).
2. Once the set sleep time has expired the clock radio will automatically power off.
Bluetooth Wireless
Pairing to a Bluetooth Device and Playing Audio
After initial pairing, the unit will stay paired unless unpaired manually by the user
or erased due to a reset of the device. If your device should become unpaired or if
any pairing issues should occur, remove the unit from your Bluetooth settings and
follow these steps again.
1. Press the
Source
button to switch to
Bluetooth mode
. Press and hold the
Pair
button, the
BT
symbol on the display will begin flashing and a voice
prompt will sound from the speaker.
When pairing, remain within 3 feet of the
unit.
2. Using the controls on your Bluetooth device, select
ICQ988
from your
Bluetooth settings to pair. When successfully paired, the
BT
symbol on
the display will turn solid and a voice prompt will sound.
You can refer to the
user’s manual for your specific device for instructions on pairing and connecting
Bluetooth devices.
3. Audio played through the connected Bluetooth device should now be heard
through the speakers. Use the controls on the connected Bluetooth device to
select and begin playing audio. Play, pause or skip audio using the controls
on the device or the unit.
ICQ988-2140-01-IB - 21Jun2018.indd 2
6/21/2018 1:48:24 PM
