5
3.
Software Main Interface
3.1
Log in
The default password of “Admin” is “888888”, the default password of “User” is “666666”. It is recommended to change the password after you finish the system configuration.
Note: Before using the DVR to record, you must format the HDD in system menu. If DVR doesn’t detect HDD, It will give sounds warning and a message of “NO Hard disk”
display on screen.
3.2
Camera Status Icon
The camera status includes
This icon indicates “motion detection”. It is not recording status.
Blue icon indicates “common recording”.
Green icon indicates “motion detect recording”.
Yellow icon indicates “alarm trigger recording”.
Turquoise indicates “manual recording”.
The external alarm input and alarm output status icon shown on system Tool Bar. The details are as following
The upper row of icons indicate the alarm input status. When alarm trigger, it turns to red.
The lower row of icons indicates alarm output. When alarm output trigger, it turns to red.
3.3
System status bar
In preview mode, the system status bar displays current system information "External alarm input"/"Alarm output"/"HDD usage"/"number of the client connection"/"system
time."
This icon indicates hard disk OK. The percentage number indicates the HDD usage.
This icon indicates “Hard disk error” or “No hard disk”.
This icon indicates client connection. The number behind “NET” shows connection number.
This icon indicates “No client connection
”
