8
5.
Record
Click
in Tool Bar then go to Record page. In Record page please configure all parameters to fulfill your requirements. Enter advanced page to get more option.
Record quality level definition “Best 768Kbps” / “Better 640Kbps” / “High 512Kbps” / “Low 384Kbps”. “User-defined” ranges from 32kbps to 2048kbps.
Record frame rate levels define as “Full / 12 / 6 / 3 / 1 / User-defined” for PAL or “Full / 15 / 7 / 3 / 1 / User-defined” for NTSC. Default is “Full” means 25 fps for PAL or 30 fps for
NTSC.
Record Resource “Video” means record video only. “Video & Audio” means record video and audio.
Sub-stream
can be enabled or disabled. After enabled, press <ok> to set sub-stream frame rate and bit rate. Sub stream frame rate rages from 1 to 15 frames, bit rate ranges from
32K to 512K.
Select VIDEO CH then click button
to enter Record Schedule setup interface. Record types include 4 kinds of schedule record “common record” / “Motion record” / “Alarm
record” / “Motion and Alarm record”.
Common record
Common record means continuous record. DVR will always record when it is power on.
Motion record
If you has setup Motion Record, please continuously go to Video page to setup motion detect sensitivity and area for each camera.
Alarm record
If you setup Alarm record, you have to integrate alarm-in and relay out device such as Infra red sensor, otherwise it wouldn’t work properly. Please set alarm camera, alarm type
and trigger event in Alarm page. Trigger event includes record, PTZ preset, alarm out, buzzer and Email.
Alarm type includes N.O., N.C.
N.O.: Normally open. Circuit connected when alarm single triggered.
N.C.: Normally connected. Open when alarm single triggered.
Notes: In order to execute the Alarm Trigger Record, please set the record schedule firstly. If you need execute Alarm trigger PTZ, please don’t forget to save PTZ preset besides
herein settings. Currently only preset #1 could be linked to alarm trigger.
Motion and Alarm record
DVR will record only when both Motion detect and Alarm-in are triggered in same time. It wouldn’t record if either one happen.
