TM70Bi V3.2 (11/02)
1121174 L0.pdf
4
IKUSI reserves the right to change this information without prior notice.
4.- SAFETY INSTRUCTIONS
These instructions must be read carefully in order to install and use the set properly
and to keep it in perfect working condition and to reduce the risks of misuse.
Do not use this set on machines in potentially explosive atmospheres.
Any use other than that specified in this manual is dangerous. The following
instructions must be strictly adhered to.
4.1 - WHAT YOU MUST DO
Strictly adhere to the instructions for installation contained in this manual
Make sure that professional and competent personnel carry out the installation.
Ensure that all site and prevailing safety regulations are fully respected.
Make sure that this manual is permanently available to the operator and maintenance personnel.
Keep the transmitter out of reach of unauthorised personnel.
Remove the transmission key when the set is not in use.
On starting each working day, check to make sure that the STOP button and other safety
measures are working.
When in doubt, press the STOP button.
Whenever several sets have been installed, make sure the transmitter you are going to use is the
right one. Identify the machine controlled on the label for this purpose on the transmitter.
Service the equipment periodically.
When carrying out repairs, only use spare parts supplied by IKUSI dealers.
4.2 - WHAT YOU MUST NOT DO
Never make any changes to the set, which have been studied and approved by manufacturer.
Never power the equipment other than with the specified power supply.
Never allow unqualified personnel to operate the equipment.
After use, never leave the equipment ON. Always use the contact key or the STOP button to avoid
accidentally activating manoeuvres.
Do not use the set when visibility is limited.
Avoid knocking or dropping the set.
Do not use the set if failure is detected.
Changes or modifications not expressly approved by IKUSI could void the user’s authority to
operate this equipment.
