IKUSI OP-131Tx Series, User Manual

Page: 14 / 19

OP-131Tx_V2 User Manual.docx Page
14
of
19
30-Aug-2018
© 2018 IKUSI ANZ Pty Ltd - All rights reserved - Reproduction without consent is prohibited
System supports the following commands:
help
ethcfg
settrap
community
Restore
setsn
setpswd
entplogo
Exit
Specific using as follows
：
help
This command shows current application program version, program name and the internal
commands list of the system as follows:
You can also use the “help” command to show help information of other commands, such as
“help ethcfg”
，
ethcfg’s help information appears as follows:
List internal commands of the system;
Configure the Ethernet operating parameters;
Configure the aim host IP address of the SNMP Trap;
Configure the SNMP group name;
Restore the factory default values;
Set serial number;
Set login password;
Set company logo and equipment model;
Logout;