24
Traps Section :
You select here the streamer parameters whose alarm status generate traps, either with
or without acknowledgement.
"Hardware" : Tick the box for sending an alarm trap when there be an anomaly in
the streamer's circuitry. If you want to receive an acknowledgement from the SNMP
manager, tick also the Enable ACK box at right.
"Input" : Idem when there be no synchronisation with the input signal.
"DiSEqC" : Idem when the DiSEqC fonction is not available or doesn't work.
"CAM" : Idem when the CAM module doesn't work properly or is not installed.
"ColdStart" : Idem when there be a Cold Start (the power is turned off then back
on).
"WarmStart" : Idem when the module is rebooted (through the Shutdown card of
the Configuration window, see page 9).
"CFP Temperature" : It is applicable only if the streamer module is linked to a CFP-
702 power supply, with the object of incorporating this to the SNMP system. It is
related to the internal temperature of the power supply. Tick the box so that the
alarm trap be transmitted when this temperature exceedes the established limits.
"CFP Voltage" : Idem in relation to the +12V output voltage of the power supply.
"Status" : Tick the box for sending a "summary" trap with the current status of the
most outstanding parameters.
"Time between Sendings" : This box is enabled only if you ticked the previous one.
Enter the desired time in seconds to pass between "summary" trap sendings.
+V
LNB
+12V
QPSK IN
CONTROL
+V
LNB
+12V
QPSK IN
CONTROL
+V
LNB
+12V
QPSK IN
CONTROL
+V
LNB
+12V
QPSK IN
CONTROL
+V
LNB
+12V
QPSK IN
CONTROL
+V
LNB
+12V
QPSK IN
CONTROL
Link
Act
LAN
Link
Act
LAN
Link
Act
LAN
Link
Act
LAN
Link
Act
LAN
Link
Act
LAN
+V
LNB
+12V
QPSK IN
CONTROL
Link
Act
LAN
RNS-101
DVB-S RADIO
Þ
IPTV
STREAMER
Ref. 5112
SNS-101
DVB-S
Þ
IPTV
STREAMER
SNS-101
DVB-S
Þ
IPTV
STREAMER
SNS-101
DVB-S
Þ
IPTV
STREAMER
SNS-101
DVB-S
Þ
IPTV
STREAMER
SYNC
STATUS
SYNC
STATUS
SYNC
STATUS
SYNC
STATUS
SYNC
STATUS
SYNC
STATUS
SYNC
STATUS
SNS-101
DVB-S
Þ
IPTV
STREAMER
Ref. 5101
SNS-101
DVB-S
Þ
IPTV
STREAMER
Ref. 5101
LAN
LAN
LAN
LAN
LAN
LAN
LAN
CAM
CAM
CAM
CAM
CAM
CAM
CAM
POWER
+24V
+18V
300 mA
(22 KHz)
+13V
300 mA
(22 KHz)
+18V
300 mA
+13V
300 mA
:700 mA
I
TOT (MAX)
CFP-702
CONTROL
POWER
+24V
+18V
300 mA
(22 KHz)
+13V
300 mA
(22 KHz)
+18V
300 mA
+13V
300 mA
:700 mA
I
TOT (MAX)
CFP-702
CONTROL
Ref. 5101
Ref. 5101
Ref. 5101
Ref. 5101
monitoring
jumper
monitoring
jumper
Figure 2.15 - Example of mixed RNS/SNS Headend with
monitor redundant power system. Contains 1 RNS-101
streamers, 6 SNS-101 and 2 CFP-702 power supplies.
SNMP
