4
GB
| Operating Instructions
3. Symbole auf der Maschine
For safe operation and maintenance, symbols are carved
in relief on the machine. According to these indications,
please be careful not to make any mistake.
a)
The port to refuel the „MIX GASOLINE“
Position:
near the fuel cap
b)
The port to refuel the chain oil
Position:
near the oil cap
c)
Setting the switch to the “O” position,
the engine stops immediately.
Position:
Front at the top of the rear
handle (near the switch)
d)
Starting the engine, if you pull out the
choke knob (at the back-right of the rear
handle) to the point of the arrow, you
can set the starting mode as follows.
• First-stage position – starting mode
when the engine is warm.
• Second-stage position – starting mode
when the engine is cool.
Position:
Upper-right of the chain cover
e)
Adjust the oil pump. If you turn the rod
by screwdriver follow the arrow to the
„MAX“ position, the chain oil flow more,
and if you turn to the „MIN“ position,
less.
Position:
Bottom of the power unit
f)
The screw under the “H” stamp is The
High-speed adjustment screw. The
screw under the “L” stamp is The Slow-
speed adjustment screw. The screw
at the left of the “T” stamp is the Idle
adjustment screw.
Position:
Left side of the rear handle
g)
It shows the directions that the chain
brake is released (for the white arrow)
and activated (for the black arrow).
h)
Shows the direction of the saw
chain installation.
Position:
Front of the chain cover
Guaranteed sound power level for this equip-
ment. L
WA
Engine manual start.
This chain-saw is for trained tree ser-
vice operators only.
Appropriate ear, eye, and head protec-
tion must be worn.
Read, understand and follow all warn-
ings.
Use appropriate protection for foot-leg
and hand-arm.
Warning! Kickback may occur!
One handed operation of the saw can
be dangerous.
Use the chain saw with two hands.
Read operator’s instruction book before
operating this machine.
4. For safe operation
Before operate the product
1. Never operate a chain saw when you are fatigued,
ill, or upset, or under the influence of medication that
may make you drowsy, or if you are under the influ
-
ence of alcohol or drugs.
2.
Use safety footwear, snug fitting clothing and eye,
hearing and head protection devices.
3. Always use caution when handling fuel. Wipe up all
spills and then move the chain saw at least ten (10)
feet [three (3) m] from the fueling point before start
-
ing the engine.
4.
Eliminate all sources of sparks or flame (ie. smok
-
ing, open flames, or work that can cause sparks) in
the areas where fuel is mixed, poured, or stored. Do
not smoke while handling fuel or while operating the
chain saw.
5. Do not allow other persons to be near the chain saw
when starting the engine or cutting a wood. Keep by-
standers and animals out of the work area. Children,
pets, and bystanders should be a minimum of 30feet
(10m) away when you start or operate the chain saw.
6. Never start cutting until you have a clear work area,
secure footing, and planned retreat path from the
falling tree.
7.
Always hold the chain saw firmly with both hands
when the engine is running. Use a firm grip with
thumb and fingers encircling the chain saw handles.
8. Keep all parts of your body away from the saw chain
when the engine is running. Before you start the
