8
PILOT VALVE
SCREW
PILOT
INNER
BURNER
OUTER
BURNER
Fig. 5
Fig. 6
LIGHTING INSTRUCTIONS
1. Turn all burner valves to OFF position and wait 5 minutes.
2. Turn gas shutoff valve ON.
3. Light standing pilot with a lit taper (see Fig 6). Adjust pilot to ¼” high flame, if
necessary, by turning pilot valve adjusting screw (see Fig. 5) counterclockwise to
increase or clockwise to decrease flame.
4. Turn burner valve to ON position.
5. If pilot does not light, turn main gas supply OFF and repeat steps 1 through 4.
TO COMPLETELY SHUTDOWN THE BURNERS AND PILOT LIGHTS
For complete shutdown: Turn the main gas supply valve OFF.
CLEANING
T op grate(s) may be immersed in strong commercial c leaning compound overnight. In the
morning , rinse with hot water to remove any residues of cleaning compound. Thoroughly
dry and apply a light coating of cooking oil to prevent rusting.
Stainless steel surfaces may be cleaned using damp cloth with mild detergent and water
solution. Places where fat, grease, or food can accumulate must be cleaned regularly.
The grease drawer should be emptied regularly when cool.