5
LEG INSTALLATION
The stockpot range is shipped without the legs attached. The
stockpot range must not be operated without the legs attached to the unit.
1. Remove cast iron grate and burners from chassis.
2. Turn chassis upside down and locate the leg plate to alight the four screw holes (Fig. 1).
3. Screw legs pl at e wi t h fo ur scr e ws on the bottom until tight (Fig. 2). Use a pipe or
strap wrench with a towel (so as not to scratch leg) if needed to firmly tighten legs.
Fig. 1
Fig. 2
4. Continue process until all legs are installed. Single stockpots will have four legs
and double stockpots will have six legs.
5. Return stockpot to upright position; reinstall burners and grates.