Ikon IK23 Installation And User Manual Download Page 7

12/12/2018

7

WARNING!
Fire danger!

– The oil residue in the oil filter may catch

fire.

Clean the oil filter at least once every 3

months.

Never operate the device without the

oil filter.

– The oil residue in the oil filter may catch fire.

Never work with open flame (ex. flambe) near

the device. The apparatus is allowed to be

installed near a solid fuel (e.g. wood or coal)

heater only if it has a non-removable cover. No

sparks should be scattered.

– Hot oils and fats catch fire easily. Hot oils and

fats should never be left unattended. Never try

to put out the fire with water. Turn off the

cooker. Kill the flames carefully using a cover,

fire blanket or a similar material.

– Gas operated cookers that do not have a

cooking pot on create high heat during opera-

tion. A ventilation device placed over the

cookers can be damaged or burned for this

reason. Operate gas cookers only when there

is a cooking pot on them.

– Operating multiple gas cookers simultaneously

creates high heat. A ventilation device placed

over the cookers can be damaged or burned

for this reason. Never operate two gas cookers

longer than 15 minutes on high flame setting. A

large burner over 5kW (Wok) has the power of

two gas burners.

WARNING!
Electrocution hazard!

– A malfunctioning device may cause electric

shock. Never turn on a malfunctioning device.

Pull the power plug and switch off the circuit

breaker. Call customer service.

– Unsuitable repairs pose hazards. Repairs and

replacement of damaged power cords must be

performed only by a customer services techni-

cian trained by us. If the device is malfunc-

tioning pull the power plug and switch off the

circuit breaker. Call customer service.

– Water leaking into the device may cause elec-

tric shock. High pressure or steam cleaners

must not be used.

WARNING AND SAFETY PRECAUTIONS

LETHAL RISK, DANGER OF POISONING 

07.02.2019

4260 HOOD USER GUIDE

9

Summary of Contents for IK23






















Reviews: